Adams

Fly Name
Hook 10-20
Thread black
Wings 2 grizzly hackle tips
Tails moose
Body dubbing
Hackle grizzly, brown

Adams

Adams

Wrap thread onto the hook shank from about 1mm behind the eye to the start of the hook bend. Tie in about a dozen moose fibers and secure with 5 tight wraps.

Adams

Tie in 2 grizzly hackle tips in an upright position and secure with 5 tight wraps. Trim away excess. Divide wings by figure 8 wrapping thread in between them.

Adams

Select hackle for proper size and desired stiffness. Cut stem at junction with webby and stiff fibers. Strip away fibers exposing 2 to 3mm of stem. Tie in stem with 2 loose wraps to place, followed up with 3 to 5 tight thread wraps. Concave side of hackle is opposite of body.

Adams

Wax thread with a light coat of wonder wax. Apply a thin amount of dubbing. Spread dubbing fibers out evenly on thread. Wrap dubbed thread evenly forward to the front end of the body. Tie off with 3 to 5 tight wraps. Evenly wind both hackles with wraps behind and in front of wing.

Adams

Whip finish head with 4 to 8 turns. Pull tag end firmly and cut off excess thread. Place a drop of head cement on knot and allow it to penetrate both the thread base and hackle stems.

Adams
thread 6/0
hook 10 to 20
body gray dubbing
hackle brown & grizzly
tail moose
wing grizzly hackle tips

Adams

Adams

Perigree Learning, LLC.
© 2024 The Gale Group, Inc. All rights reserved.
© 2024 Perigee Learning LLC. All rights reserved.
LoveTheOutdoors.com is owned and operated by Advameg, Inc. © 2024 Advameg, Inc.